EZG-head-front-blk-tan-705x470.jpg

Dr.Z EZG-50

“My Spin on the blackface reverb head that never was.” – Dr. Z

Specifications

Power Output50 Watts

Output Tubes2 TUNG-SOL 6L6GC STR

Preamp TubesV1 12AX7, V2 NOS 12AT7/6201, V3 12AX7, V4 NOS 12AT7/6201

Rectifier1 – 5AR4

ControlsPre & Post Volume, Treble, Mid, Bass, Dwell, Mix

ConfigurationsHead, 1×12, 2×10 Combos

ColorsBlack, Blonde, Red

Dimensions & WeightHead: 22 3/4″ W, 10 1/8″ H, 10″ D; 44 lbs.
1×12 Combo: 22 ¾” W, 20” H, 10 ½” D; 65 lbs.
2×10 Combo: 22 ¾” W, 20” H, 10 ½” D; 68 lbs.

Owners ManualDownload

General Information

The wait is finally over… the EZG-50 is here! The EZG-50 has a very definitive 6L6 clean sound. Whether you are lusting after the classic “El Mocambo” tone, looking to surf the big waves, or want twang straight out of Bakersfield. The EZG-50 will satisfy the most discriminating blackface tone seeker. This is a sound that has been missing in the Z line up until now.

Much time and care was taken in the development of the EZG-50. The seed of the amp came from a new 6L6 output transformer designed for Z Amps by Ken Fischer. The output transformer has a very unique impedance not used by other American amp makers. This is one of the key factors to the EZG-50s sound.

NOS Allen Bradley carbon comp resistors are used in all critical tone positions of the EZG-50 circuit. These classic resistors add a warmth and depth to the tone that only they can give.

The EZG-50 features a 2 knob all tube reverb. The Dwell and Mix controls give you full authority over your reverb needs. Anything from a subtle tail on the note to a full-on surf assault is at your command. You also get a full EQ and a Pre and Post master volume.

Around back you’ll find 16, 8, and 4 ohm speaker outs to accommodate any cabinet.

With 50 watts of clean power, 2 knob reverb, and a tube rectifier, the EZG-50 is the blackface head that never was…ala Dr Z!